Shortcuts to metrics:

1. FCR & eFCR	4. eFIFO
2. FFDR	5. LCA
3. FIFO

---

Feed Conversion Ratio (FCR) & Economic Feed Conversion Ratio (eFCR): livestock production efficiency

There are various versions of FCR, which is simply the conventional measure of livestock production efficiency, the weight of feed intake divided by weight gained by the animal or fish. There are two versions of FCR which are often used, eFCR and bFCR:

• The eFCR (economic), being a metric used to define the various mass balances that occur in the process of farming animals. It accounts for feed wastage as well as any animal production losses (e.g. mortalities) that occur.
• The bFCR (biological) is a more theoretical metric used to define the biological efficiency of the feed (and/or animal). It removes any non-consumed feed and production losses from the calculation to allow for that focus on the biological efficiency. The bFCR is always lower than the eFCR.

The FCR has the advantage in that it is conceptually quite simple; a comparison of salmon with an eFCR of 1.3 against chickens with an eFCR of 2 and pigs with an eFCR of 3, shows very easily the differences in efficiencies across different intensive animal production systems.

Drop down:

eFCR calculation

The data presented below, is based on industry-wide feed conversion rates (FCR), and regional proportional fed volumes estimates based on expert opinion.

Species	2000	2010	2020
Crustaceans	1.31	1.22	0.93
Marine Fin Fish	1.48	1.20	0.96
Salmonids	1.54	1.50	1.27
Eels	1.22	0.89	0.82
Carps	0.44	0.39	0.30
Cyprinids	1.54	1.36	1.35
Freshwater Fish	1.14	1.06	1.02

 

---

Fish In:Fish Out ratio (FIFO): how much fish is used to produce farmed fish

The FIFO (Fish In:Fish Out) ratio was developed as a way to examine the marine ingredient use during animal production, though most of the focus has been on aquaculture in relation to the use of wild fish in feed to produce farmed fish. FIFO is often used as simplified environmental benchmark and although it remains an important metric, it has limitations. These include its application to one sector/ingredient in isolation of a more global contribution, especially the value and quality of the ingredients. FIFO doesn't distinguish between by-products and reduction fishery sources. Replacing fishmeal and fish oil doesn't necessarily imply that those other resources are more sustainable or responsibly sourced.

The way that IFFO calculates FIFO ratios is based on the following:

• Use of FAO production data to provide estimates for aquaculture production tonnages by species groups;
• Standard yield figures for fishmeal (22.5%) and fish oil (5%) applied across all raw materials in production;
• Application of industry-wide feed inclusion levels for fishmeal and fish oil, feed conversion rates (eFCR), and regional proportional fed volumes estimates based on expert opinion;
• A correction for fishmeal and fish oil volumes assuming marine ingredients operate within a global industry where the redirection of products to meet market needs occurs (removes the risk of double-counting).

Drop down:

FIFO calculation

Species	2000	2010	2020
Crustaceans	1.61	0.83	0.45
Marine Fin Fish	2.21	0.98	0.75
Salmonids	3.03	1.87	0.93
Eels	2.86	1.51	1.34
Carps	0.09	0.03	0.01
Cyprinids	0.63	0.25	0.11
Freshwater Fish	0.71	0.44	0.29

For this update we have revised the composition of each category/family. This is to reflect the expansion of aquaculture over the last 10 years, both in terms of species farmed and tonnage produced.

---

The Forage Fish Dependency Ratio (FFDR): based on the quantity of wild fish used in feeds

The Forage Fish Dependency Ratio (FFDR) is another simple metric for calculating the quantity of wild (forage) fish used in feeds in relation to the quantity of fed animal production. FFDR was originally developed as a way of attempting to quantify the environmental impact of feed use in aquaculture systems and there has been a particular attention on FFDR in salmon aquaculture. Like FIFO, the FFDR is expressed as a ratio that considers the amount of marine ingredients in the feed, but focusses on those that originate from forage fisheries.

It is calculated based on taking into account the eFCR, the inclusion level of forage fish-derived marine ingredients in the feed (notably any marine ingredients produced from by-products are not included) and the yield ratio of producing marine ingredients from forage fisheries. One of the limitations to the use of FFDR is that it incorrectly assumes that the species used in marine ingredient production would have higher value to society by being used differently, such as through direct human consumption markets, or by environmental benefits through conservation. However, if marine ingredients are produced from well-managed fisheries, or from by-products from well managed fisheries, then their use in animal feeds can remain as the best use of that resource. As such, assumptions about the environmental impact of forage fish exploitation are often not valid.

Drop down:

FFDR calculation

Species	2000	2010	2020
Crustaceans	1.29	0.62	0.31
Marine Fin Fish	1.77	0.74	0.52
Salmonids	2.43	1.40	0.64
Eels	2.29	1.13	0.93
Carps	0.08	0.02	0.01
Cyprinids	0.50	0.19	0.08
Freshwater Fish	0.57	0.33	0.20

 

---

Economic Fish In:Fish Out (eFIFO): applying an economic allocation

The economic Fish in: Fish out ratio is a more advanced method used to calculate the FIFO ratio based on the principle of economic allocation to the values of the fishmeal and fish oil used in the feeds.

More recently, the eFIFO (economic Fish In:Fish Out) has been proposed as an improvement to the FIFO (Kok et al., 2020). In the eFIFO, an economic allocation (weighting) has been applied to the relative values of the fishmeal and fish oil produced. This economic allocation approach is also aligned with the agreed standards used in feed sustainability assessment proposed by the Global Feed Lifecycle Assessment (LCA) Institute (GFLI). The GFLI is an independent animal nutrition and food industry institute purposed with the development and management of tools and databases to stimulate continuous improvement of the environmental performance in the animal nutrition and food industry.

Economic allocation acts as a proxy for the nutritional value of the ingredients and places greater importance on the ingredients with a more limited availability and their relative demand. In the case of eFIFO we observe that with the changing balance in values between fishmeal and fish oil over time, we are better able to represent that sustainability burden. The ratio also allows us to recognise the economic contribution of by-products relative to the economic contribution of the direct human consumption component.

Notably, when using the eFIFO we observe that, on average, 1kg marine raw material gives 5kg farmed fish across global production systems. Thus, fish which do not have a food market are converted into 5 times the volume of fish that people do want to eat. Additionally, there is also now a decreasing impact on ecosystems, with over a 1/3 of marine ingredients now being made from by-products that are left over after fish produced for food have been processed.

 

Drop down:

eFIFO calculations

Lifecycle assessment (LCA) analyses has been developed to address the limitations of the previous metrics and to create more holistic sustainability metrics with traceability across the value chain and greater cross sector harmonisation of metrics. It is a far more complex calculation, and analyses take into account a variety of environmental impact categories, such as global warming potential, cumulative energy use, abiotic resource use, ozone depletion potential, consumptive water use; and land use, among others. To assess these impacts, the analyses do not just cover the production units, but cover the feed ingredients and their processing, through to the on farm production, to processing, distribution, consumption and waste disposal. All these steps use land, water, raw materials and energy, and invariably have impacts that can lead to harmful emissions. The overall aim is to provide a comprehensive assessment of the full (global) impact of food-production and avoid trade-offs or cross-subsidisations of sectors through incomplete sustainability accounting.

---